How strong is it? |
||
The properties of the Techno-Weld material have been developed to give a good balance of tensile and shear strength for joining together with a high degree of finished hardness that machines well without "picking" as Aluminum does. |
||
In tests on pieces of Aluminun/Copper alloy (2000 series), a lap-joint made with Techno-Weld showed a shear strength of 90% of the original material, compared to 70% for a conventional weld. Joints can be made as strong or stronger than the alloy being worked on, although joint design will play an important part. |
||
Technical Data: |
||
Melting Range..............................715-735 degrees F |
||
Tensile Strength....................................>50,000 PSI |
||
Shear Strength......................................>45,000 PSI |
||
Brinell Hardness...................................................97 |
||
Compressive strength.............................>90,000 PSI |
||
Thermal Epansion........................0.0000299 in/deg F |
||
Electrical Conductivity..........................24.9% of Cu. |
||
Thermal Conductivity...0.24 cal/cu. cm./deg C/second |
||
Flux Required.................................................None |
||
Techno-Weld Incorporated |
||
